Parallel Port Devices¶
-
parport_register_driver
(driver)¶ register a parallel port device driver
Parameters
driver
structure describing the driver
This can be called by a parallel port device driver in order to receive notifications about ports being found in the system, as well as ports no longer available.
If devmodel is true then the new device model is used for registration.
The driver structure is allocated by the caller and must not be deallocated until after calling
parport_unregister_driver()
.If using the non device model: The driver’s attach() function may block. The port that attach() is given will be valid for the duration of the callback, but if the driver wants to take a copy of the pointer it must call
parport_get_port()
to do so. Calling parport_register_device() on that port will do this for you.The driver’s detach() function may block. The port that detach() is given will be valid for the duration of the callback, but if the driver wants to take a copy of the pointer it must call
parport_get_port()
to do so.Returns 0 on success. The non device model will always succeeds. but the new device model can fail and will return the error code.
-
module_parport_driver
(__parport_driver)¶ Helper macro for registering a modular parport driver
Parameters
__parport_driver
- struct parport_driver to be used
Description
Helper macro for parport drivers which do not do anything special in module
init and exit. This eliminates a lot of boilerplate. Each module may only
use this macro once, and calling it replaces module_init()
and module_exit()
.
-
int
parport_yield
(struct pardevice *dev)¶ relinquish a parallel port temporarily
Parameters
struct pardevice *dev
- a device on the parallel port
Description
This function relinquishes the port if it would be helpful to other
drivers to do so. Afterwards it tries to reclaim the port using
parport_claim()
, and the return value is the same as for
parport_claim()
. If it fails, the port is left unclaimed and it is
the driver’s responsibility to reclaim the port.
The parport_yield()
and parport_yield_blocking()
functions are for
marking points in the driver at which other drivers may claim the
port and use their devices. Yielding the port is similar to
releasing it and reclaiming it, but is more efficient because no
action is taken if there are no other devices needing the port. In
fact, nothing is done even if there are other devices waiting but
the current device is still within its “timeslice”. The default
timeslice is half a second, but it can be adjusted via the /proc
interface.
-
int
parport_yield_blocking
(struct pardevice *dev)¶ relinquish a parallel port temporarily
Parameters
struct pardevice *dev
- a device on the parallel port
Description
This function relinquishes the port if it would be helpful to other
drivers to do so. Afterwards it tries to reclaim the port using
parport_claim_or_block()
, and the return value is the same as for
parport_claim_or_block()
.
-
int
parport_wait_event
(struct parport *port, signed long timeout)¶ wait for an event on a parallel port
Parameters
struct parport *port
- port to wait on
signed long timeout
time to wait (in jiffies)
This function waits for up to timeout jiffies for an interrupt to occur on a parallel port. If the port timeout is set to zero, it returns immediately.
If an interrupt occurs before the timeout period elapses, this function returns zero immediately. If it times out, it returns one. An error code less than zero indicates an error (most likely a pending signal), and the calling code should finish what it’s doing as soon as it can.
-
int
parport_wait_peripheral
(struct parport *port, unsigned char mask, unsigned char result)¶ wait for status lines to change in 35ms
Parameters
struct parport *port
- port to watch
unsigned char mask
- status lines to watch
unsigned char result
desired values of chosen status lines
This function waits until the masked status lines have the desired values, or until 35ms have elapsed (see IEEE 1284-1994 page 24 to 25 for why this value in particular is hardcoded). The mask and result parameters are bitmasks, with the bits defined by the constants in parport.h:
PARPORT_STATUS_BUSY
, and so on.The port is polled quickly to start off with, in anticipation of a fast response from the peripheral. This fast polling time is configurable (using /proc), and defaults to 500usec. If the timeout for this port (see
parport_set_timeout()
) is zero, the fast polling time is 35ms, and this function does not call schedule().If the timeout for this port is non-zero, after the fast polling fails it uses
parport_wait_event()
to wait for up to 10ms, waking up if an interrupt occurs.
-
int
parport_negotiate
(struct parport *port, int mode)¶ negotiate an IEEE 1284 mode
Parameters
struct parport *port
- port to use
int mode
mode to negotiate to
Use this to negotiate to a particular IEEE 1284 transfer mode. The mode parameter should be one of the constants in parport.h starting
IEEE1284_MODE_xxx
.The return value is 0 if the peripheral has accepted the negotiation to the mode specified, -1 if the peripheral is not IEEE 1284 compliant (or not present), or 1 if the peripheral has rejected the negotiation.
-
ssize_t
parport_write
(struct parport *port, const void *buffer, size_t len)¶ write a block of data to a parallel port
Parameters
struct parport *port
- port to write to
const void *buffer
- data buffer (in kernel space)
size_t len
number of bytes of data to transfer
This will write up to len bytes of buffer to the port specified, using the IEEE 1284 transfer mode most recently negotiated to (using
parport_negotiate()
), as long as that mode supports forward transfers (host to peripheral).It is the caller’s responsibility to ensure that the first len bytes of buffer are valid.
This function returns the number of bytes transferred (if zero or positive), or else an error code.
-
ssize_t
parport_read
(struct parport *port, void *buffer, size_t len)¶ read a block of data from a parallel port
Parameters
struct parport *port
- port to read from
void *buffer
- data buffer (in kernel space)
size_t len
number of bytes of data to transfer
This will read up to len bytes of buffer to the port specified, using the IEEE 1284 transfer mode most recently negotiated to (using
parport_negotiate()
), as long as that mode supports reverse transfers (peripheral to host).It is the caller’s responsibility to ensure that the first len bytes of buffer are available to write to.
This function returns the number of bytes transferred (if zero or positive), or else an error code.
-
long
parport_set_timeout
(struct pardevice *dev, long inactivity)¶ set the inactivity timeout for a device
Parameters
struct pardevice *dev
- device on a port
long inactivity
inactivity timeout (in jiffies)
This sets the inactivity timeout for a particular device on a port. This affects functions like
parport_wait_peripheral()
. The special value 0 means not to call schedule() while dealing with this device.The return value is the previous inactivity timeout.
Any callers of
parport_wait_event()
for this device are woken up.
-
int
__parport_register_driver
(struct parport_driver *drv, struct module *owner, const char *mod_name)¶ register a parallel port device driver
Parameters
struct parport_driver *drv
- structure describing the driver
struct module *owner
- owner module of drv
const char *mod_name
module name string
This can be called by a parallel port device driver in order to receive notifications about ports being found in the system, as well as ports no longer available.
If devmodel is true then the new device model is used for registration.
The drv structure is allocated by the caller and must not be deallocated until after calling
parport_unregister_driver()
.If using the non device model: The driver’s attach() function may block. The port that attach() is given will be valid for the duration of the callback, but if the driver wants to take a copy of the pointer it must call
parport_get_port()
to do so. Calling parport_register_device() on that port will do this for you.The driver’s detach() function may block. The port that detach() is given will be valid for the duration of the callback, but if the driver wants to take a copy of the pointer it must call
parport_get_port()
to do so.Returns 0 on success. The non device model will always succeeds. but the new device model can fail and will return the error code.
-
void
parport_unregister_driver
(struct parport_driver *drv)¶ deregister a parallel port device driver
Parameters
struct parport_driver *drv
structure describing the driver that was given to
parport_register_driver()
This should be called by a parallel port device driver that has registered itself using
parport_register_driver()
when it is about to be unloaded.When it returns, the driver’s attach() routine will no longer be called, and for each port that attach() was called for, the detach() routine will have been called.
All the driver’s attach() and detach() calls are guaranteed to have finished by the time this function returns.
-
struct parport *
parport_get_port
(struct parport *port)¶ increment a port’s reference count
Parameters
struct parport *port
the port
This ensures that a struct parport pointer remains valid until the matching
parport_put_port()
call.
-
void
parport_put_port
(struct parport *port)¶ decrement a port’s reference count
Parameters
struct parport *port
the port
This should be called once for each call to
parport_get_port()
, once the port is no longer needed. When the reference count reaches zero (port is no longer used), free_port is called.
-
struct parport *
parport_register_port
(unsigned long base, int irq, int dma, struct parport_operations *ops)¶ register a parallel port
Parameters
unsigned long base
- base I/O address
int irq
- IRQ line
int dma
- DMA channel
struct parport_operations *ops
pointer to the port driver’s port operations structure
When a parallel port (lowlevel) driver finds a port that should be made available to parallel port device drivers, it should call
parport_register_port()
. The base, irq, and dma parameters are for the convenience of port drivers, and for ports where they aren’t meaningful needn’t be set to anything special. They can be altered afterwards by adjusting the relevant members of the parport structure that is returned and represents the port. They should not be tampered with after calling parport_announce_port, however.If there are parallel port device drivers in the system that have registered themselves using
parport_register_driver()
, they are not told about the port at this time; that is done byparport_announce_port()
.The ops structure is allocated by the caller, and must not be deallocated before calling
parport_remove_port()
.If there is no memory to allocate a new parport structure, this function will return
NULL
.
-
void
parport_announce_port
(struct parport *port)¶ tell device drivers about a parallel port
Parameters
struct parport *port
parallel port to announce
After a port driver has registered a parallel port with parport_register_port, and performed any necessary initialisation or adjustments, it should call
parport_announce_port()
in order to notify all device drivers that have calledparport_register_driver()
. Their attach() functions will be called, with port as the parameter.
-
void
parport_remove_port
(struct parport *port)¶ deregister a parallel port
Parameters
struct parport *port
parallel port to deregister
When a parallel port driver is forcibly unloaded, or a parallel port becomes inaccessible, the port driver must call this function in order to deal with device drivers that still want to use it.
The parport structure associated with the port has its operations structure replaced with one containing ‘null’ operations that return errors or just don’t do anything.
Any drivers that have registered themselves using
parport_register_driver()
are notified that the port is no longer accessible by having their detach() routines called with port as the parameter.
-
struct pardevice *
parport_register_dev_model
(struct parport *port, const char *name, const struct pardev_cb *par_dev_cb, int id)¶ register a device on a parallel port
Parameters
struct parport *port
- port to which the device is attached
const char *name
- a name to refer to the device
const struct pardev_cb *par_dev_cb
- struct containing callbacks
int id
device number to be given to the device
This function, called by parallel port device drivers, declares that a device is connected to a port, and tells the system all it needs to know.
The struct pardev_cb contains pointer to callbacks. preemption callback function, preempt, is called when this device driver has claimed access to the port but another device driver wants to use it. It is given, private, as its parameter, and should return zero if it is willing for the system to release the port to another driver on its behalf. If it wants to keep control of the port it should return non-zero, and no action will be taken. It is good manners for the driver to try to release the port at the earliest opportunity after its preemption callback rejects a preemption attempt. Note that if a preemption callback is happy for preemption to go ahead, there is no need to release the port; it is done automatically. This function may not block, as it may be called from interrupt context. If the device driver does not support preemption, preempt can be
NULL
.The wake-up (“kick”) callback function, wakeup, is called when the port is available to be claimed for exclusive access; that is,
parport_claim()
is guaranteed to succeed when called from inside the wake-up callback function. If the driver wants to claim the port it should do so; otherwise, it need not take any action. This function may not block, as it may be called from interrupt context. If the device driver does not want to be explicitly invited to claim the port in this way, wakeup can beNULL
.The interrupt handler, irq_func, is called when an interrupt arrives from the parallel port. Note that if a device driver wants to use interrupts it should use parport_enable_irq(), and can also check the irq member of the parport structure representing the port.
The parallel port (lowlevel) driver is the one that has called
request_irq()
and whose interrupt handler is called first. This handler does whatever needs to be done to the hardware to acknowledge the interrupt (for PC-style ports there is nothing special to be done). It then tells the IEEE 1284 code about the interrupt, which may involve reacting to an IEEE 1284 event depending on the current IEEE 1284 phase. After this, it calls irq_func. Needless to say, irq_func will be called from interrupt context, and may not block.The
PARPORT_DEV_EXCL
flag is for preventing port sharing, and so should only be used when sharing the port with other device drivers is impossible and would lead to incorrect behaviour. Use it sparingly! Normally, flags will be zero.This function returns a pointer to a structure that represents the device on the port, or
NULL
if there is not enough memory to allocate space for that structure.
-
void
parport_unregister_device
(struct pardevice *dev)¶ deregister a device on a parallel port
Parameters
struct pardevice *dev
pointer to structure representing device
This undoes the effect of parport_register_device().
-
struct parport *
parport_find_number
(int number)¶ find a parallel port by number
Parameters
int number
parallel port number
This returns the parallel port with the specified number, or
NULL
if there is none.There is an implicit
parport_get_port()
done already; to throw away the reference to the port thatparport_find_number()
gives you, useparport_put_port()
.
-
struct parport *
parport_find_base
(unsigned long base)¶ find a parallel port by base address
Parameters
unsigned long base
base I/O address
This returns the parallel port with the specified base address, or
NULL
if there is none.There is an implicit
parport_get_port()
done already; to throw away the reference to the port thatparport_find_base()
gives you, useparport_put_port()
.
-
int
parport_claim
(struct pardevice *dev)¶ claim access to a parallel port device
Parameters
struct pardevice *dev
pointer to structure representing a device on the port
This function will not block and so can be used from interrupt context. If
parport_claim()
succeeds in claiming access to the port it returns zero and the port is available to use. It may fail (returning non-zero) if the port is in use by another driver and that driver is not willing to relinquish control of the port.
-
int
parport_claim_or_block
(struct pardevice *dev)¶ claim access to a parallel port device
Parameters
struct pardevice *dev
pointer to structure representing a device on the port
This behaves like
parport_claim()
, but will block if necessary to wait for the port to be free. A return value of 1 indicates that it slept; 0 means that it succeeded without needing to sleep. A negative error code indicates failure.
-
void
parport_release
(struct pardevice *dev)¶ give up access to a parallel port device
Parameters
struct pardevice *dev
pointer to structure representing parallel port device
This function cannot fail, but it should not be called without the port claimed. Similarly, if the port is already claimed you should not try claiming it again.
-
struct pardevice *
parport_open
(int devnum, const char *name)¶ find a device by canonical device number
Parameters
int devnum
- canonical device number
const char *name
name to associate with the device
This function is similar to parport_register_device(), except that it locates a device by its number rather than by the port it is attached to.
All parameters except for devnum are the same as for parport_register_device(). The return value is the same as for parport_register_device().
-
void
parport_close
(struct pardevice *dev)¶ close a device opened with
parport_open()
Parameters
struct pardevice *dev
device to close
This is to
parport_open()
asparport_unregister_device()
is to parport_register_device().
16x50 UART Driver¶
-
struct uart_8250_port *
serial8250_get_port
(int line)¶ retrieve struct uart_8250_port
Parameters
int line
- serial line number
Description
This function retrieves struct uart_8250_port for the specific line. This struct must not be used to perform a 8250 or serial core operation which is not accessible otherwise. Its only purpose is to make the struct accessible to the runtime-pm callbacks for context suspend/restore. The lock assumption made here is none because runtime-pm suspend/resume callbacks should not be invoked if there is any operation performed on the port.
-
void
serial8250_suspend_port
(int line)¶ suspend one serial port
Parameters
int line
serial line number
Suspend one serial port.
-
void
serial8250_resume_port
(int line)¶ resume one serial port
Parameters
int line
serial line number
Resume one serial port.
-
int
serial8250_register_8250_port
(const struct uart_8250_port *up)¶ register a serial port
Parameters
const struct uart_8250_port *up
serial port template
Configure the serial port specified by the request. If the port exists and is in use, it is hung up and unregistered first.
The port is then probed and if necessary the IRQ is autodetected If this fails an error is returned.
On success the port is ready to use and the line number is returned.
-
void
serial8250_unregister_port
(int line)¶ remove a 16x50 serial port at runtime
Parameters
int line
serial line number
Remove one serial port. This may not be called from interrupt context. We hand the port back to the our control.
See Low Level Serial API for related APIs.
Pulse-Width Modulation (PWM)¶
Pulse-width modulation is a modulation technique primarily used to control power supplied to electrical devices.
The PWM framework provides an abstraction for providers and consumers of
PWM signals. A controller that provides one or more PWM signals is
registered as struct pwm_chip
. Providers
are expected to embed this structure in a driver-specific structure.
This structure contains fields that describe a particular chip.
A chip exposes one or more PWM signal sources, each of which exposed as
a struct pwm_device
. Operations can be
performed on PWM devices to control the period, duty cycle, polarity and
active state of the signal.
Note that PWM devices are exclusive resources: they can always only be used by one consumer at a time.
-
enum
pwm_polarity
¶ polarity of a PWM signal
Constants
PWM_POLARITY_NORMAL
- a high signal for the duration of the duty- cycle, followed by a low signal for the remainder of the pulse period
PWM_POLARITY_INVERSED
- a low signal for the duration of the duty- cycle, followed by a high signal for the remainder of the pulse period
-
struct
pwm_args
¶ board-dependent PWM arguments
Definition
struct pwm_args {
u64 period;
enum pwm_polarity polarity;
};
Members
period
- reference period
polarity
- reference polarity
Description
This structure describes board-dependent arguments attached to a PWM device. These arguments are usually retrieved from the PWM lookup table or device tree.
Do not confuse this with the PWM state: PWM arguments represent the initial configuration that users want to use on this PWM device rather than the current PWM hardware state.
-
struct
pwm_device
¶ PWM channel object
Definition
struct pwm_device {
const char *label;
unsigned long flags;
unsigned int hwpwm;
unsigned int pwm;
struct pwm_chip *chip;
void *chip_data;
struct pwm_args args;
struct pwm_state state;
struct pwm_state last;
};
Members
label
- name of the PWM device
flags
- flags associated with the PWM device
hwpwm
- per-chip relative index of the PWM device
pwm
- global index of the PWM device
chip
- PWM chip providing this PWM device
chip_data
- chip-private data associated with the PWM device
args
- PWM arguments
state
- last applied state
last
- last implemented state (for PWM_DEBUG)
-
void
pwm_get_state
(const struct pwm_device *pwm, struct pwm_state *state)¶ retrieve the current PWM state
Parameters
const struct pwm_device *pwm
- PWM device
struct pwm_state *state
- state to fill with the current PWM state
Description
The returned PWM state represents the state that was applied by a previous call to
pwm_apply_state()
. Drivers may have to slightly tweak that state before programming it to
hardware. If pwm_apply_state()
was never called, this returns either the current hardware
state (if supported) or the default settings.
-
void
pwm_init_state
(const struct pwm_device *pwm, struct pwm_state *state)¶ prepare a new state to be applied with
pwm_apply_state()
Parameters
const struct pwm_device *pwm
- PWM device
struct pwm_state *state
- state to fill with the prepared PWM state
Description
This functions prepares a state that can later be tweaked and applied
to the PWM device with pwm_apply_state()
. This is a convenient function
that first retrieves the current PWM state and the replaces the period
and polarity fields with the reference values defined in pwm->args.
Once the function returns, you can adjust the ->enabled and ->duty_cycle
fields according to your needs before calling pwm_apply_state()
.
->duty_cycle is initially set to zero to avoid cases where the current
->duty_cycle value exceed the pwm_args->period one, which would trigger
an error if the user calls pwm_apply_state()
without adjusting ->duty_cycle
first.
-
unsigned int
pwm_get_relative_duty_cycle
(const struct pwm_state *state, unsigned int scale)¶ Get a relative duty cycle value
Parameters
const struct pwm_state *state
- PWM state to extract the duty cycle from
unsigned int scale
- target scale of the relative duty cycle
Description
This functions converts the absolute duty cycle stored in state (expressed in nanosecond) into a value relative to the period.
For example if you want to get the duty_cycle expressed in percent, call:
pwm_get_state(pwm, state
);
duty = pwm_get_relative_duty_cycle(state
, 100);
-
int
pwm_set_relative_duty_cycle
(struct pwm_state *state, unsigned int duty_cycle, unsigned int scale)¶ Set a relative duty cycle value
Parameters
struct pwm_state *state
- PWM state to fill
unsigned int duty_cycle
- relative duty cycle value
unsigned int scale
- scale in which duty_cycle is expressed
Description
This functions converts a relative into an absolute duty cycle (expressed in nanoseconds), and puts the result in state->duty_cycle.
For example if you want to configure a 50% duty cycle, call:
pwm_init_state(pwm, state
);
pwm_set_relative_duty_cycle(state
, 50, 100);
pwm_apply_state(pwm, state
);
This functions returns -EINVAL if duty_cycle and/or scale are inconsistent (scale == 0 or duty_cycle > scale).
-
struct
pwm_capture
¶ PWM capture data
Definition
struct pwm_capture {
unsigned int period;
unsigned int duty_cycle;
};
Members
period
- period of the PWM signal (in nanoseconds)
duty_cycle
- duty cycle of the PWM signal (in nanoseconds)
-
struct
pwm_ops
¶ PWM controller operations
Definition
struct pwm_ops {
int (*request)(struct pwm_chip *chip, struct pwm_device *pwm);
void (*free)(struct pwm_chip *chip, struct pwm_device *pwm);
int (*capture)(struct pwm_chip *chip, struct pwm_device *pwm, struct pwm_capture *result, unsigned long timeout);
int (*apply)(struct pwm_chip *chip, struct pwm_device *pwm, const struct pwm_state *state);
int (*get_state)(struct pwm_chip *chip, struct pwm_device *pwm, struct pwm_state *state);
struct module *owner;
};
Members
request
- optional hook for requesting a PWM
free
- optional hook for freeing a PWM
capture
- capture and report PWM signal
apply
- atomically apply a new PWM config
get_state
- get the current PWM state. This function is only called once per PWM device when the PWM chip is registered.
owner
- helps prevent removal of modules exporting active PWMs
-
struct
pwm_chip
¶ abstract a PWM controller
Definition
struct pwm_chip {
struct device *dev;
const struct pwm_ops *ops;
int base;
unsigned int npwm;
struct pwm_device * (*of_xlate)(struct pwm_chip *pc, const struct of_phandle_args *args);
unsigned int of_pwm_n_cells;
struct list_head list;
struct pwm_device *pwms;
};
Members
dev
- device providing the PWMs
ops
- callbacks for this PWM controller
base
- number of first PWM controlled by this chip
npwm
- number of PWMs controlled by this chip
of_xlate
- request a PWM device given a device tree PWM specifier
of_pwm_n_cells
- number of cells expected in the device tree PWM specifier
list
- list node for internal use
pwms
- array of PWM devices allocated by the framework
-
int
pwm_config
(struct pwm_device *pwm, int duty_ns, int period_ns)¶ change a PWM device configuration
Parameters
struct pwm_device *pwm
- PWM device
int duty_ns
- “on” time (in nanoseconds)
int period_ns
- duration (in nanoseconds) of one cycle
Return
0 on success or a negative error code on failure.
-
int
pwm_enable
(struct pwm_device *pwm)¶ start a PWM output toggling
Parameters
struct pwm_device *pwm
- PWM device
Return
0 on success or a negative error code on failure.
-
void
pwm_disable
(struct pwm_device *pwm)¶ stop a PWM output toggling
Parameters
struct pwm_device *pwm
- PWM device
-
int
pwm_set_chip_data
(struct pwm_device *pwm, void *data)¶ set private chip data for a PWM
Parameters
struct pwm_device *pwm
- PWM device
void *data
- pointer to chip-specific data
Return
0 on success or a negative error code on failure.
-
void *
pwm_get_chip_data
(struct pwm_device *pwm)¶ get private chip data for a PWM
Parameters
struct pwm_device *pwm
- PWM device
Return
A pointer to the chip-private data for the PWM device.
Parameters
struct pwm_chip *chip
- the PWM chip to add
Description
Register a new PWM chip.
Return
0 on success or a negative error code on failure.
Parameters
struct pwm_chip *chip
- the PWM chip to remove
Description
Removes a PWM chip. This function may return busy if the PWM chip provides a PWM device that is still requested.
Return
0 on success or a negative error code on failure.
-
struct pwm_device *
pwm_request
(int pwm, const char *label)¶ request a PWM device
Parameters
int pwm
- global PWM device index
const char *label
- PWM device label
Description
This function is deprecated, use pwm_get()
instead.
Return
A pointer to a PWM device or an ERR_PTR()-encoded error code on failure.
-
struct pwm_device *
pwm_request_from_chip
(struct pwm_chip *chip, unsigned int index, const char *label)¶ request a PWM device relative to a PWM chip
Parameters
struct pwm_chip *chip
- PWM chip
unsigned int index
- per-chip index of the PWM to request
const char *label
- a literal description string of this PWM
Return
A pointer to the PWM device at the given index of the given PWM chip. A negative error code is returned if the index is not valid for the specified PWM chip or if the PWM device cannot be requested.
-
void
pwm_free
(struct pwm_device *pwm)¶ free a PWM device
Parameters
struct pwm_device *pwm
- PWM device
Description
This function is deprecated, use pwm_put()
instead.
-
int
pwm_apply_state
(struct pwm_device *pwm, const struct pwm_state *state)¶ atomically apply a new state to a PWM device
Parameters
struct pwm_device *pwm
- PWM device
const struct pwm_state *state
- new state to apply
-
int
pwm_capture
(struct pwm_device *pwm, struct pwm_capture *result, unsigned long timeout) capture and report a PWM signal
Parameters
struct pwm_device *pwm
- PWM device
struct pwm_capture *result
- structure to fill with capture result
unsigned long timeout
- time to wait, in milliseconds, before giving up on capture
Return
0 on success or a negative error code on failure.
-
int
pwm_adjust_config
(struct pwm_device *pwm)¶ adjust the current PWM config to the PWM arguments
Parameters
struct pwm_device *pwm
- PWM device
Description
This function will adjust the PWM config to the PWM arguments provided by the DT or PWM lookup table. This is particularly useful to adapt the bootloader config to the Linux one.
-
struct pwm_device *
pwm_get
(struct device *dev, const char *con_id)¶ look up and request a PWM device
Parameters
struct device *dev
- device for PWM consumer
const char *con_id
- consumer name
Description
Lookup is first attempted using DT. If the device was not instantiated from a device tree, a PWM chip and a relative index is looked up via a table supplied by board setup code (see pwm_add_table()).
Once a PWM chip has been found the specified PWM device will be requested and is ready to be used.
Return
A pointer to the requested PWM device or an ERR_PTR()-encoded error code on failure.
-
void
pwm_put
(struct pwm_device *pwm)¶ release a PWM device
Parameters
struct pwm_device *pwm
- PWM device
-
struct pwm_device *
devm_pwm_get
(struct device *dev, const char *con_id)¶ resource managed
pwm_get()
Parameters
struct device *dev
- device for PWM consumer
const char *con_id
- consumer name
Description
This function performs like pwm_get()
but the acquired PWM device will
automatically be released on driver detach.
Return
A pointer to the requested PWM device or an ERR_PTR()-encoded error code on failure.
-
struct pwm_device *
devm_fwnode_pwm_get
(struct device *dev, struct fwnode_handle *fwnode, const char *con_id)¶ request a resource managed PWM from firmware node
Parameters
struct device *dev
- device for PWM consumer
struct fwnode_handle *fwnode
- firmware node to get the PWM from
const char *con_id
- consumer name
Description
Returns the PWM device parsed from the firmware node. See of_pwm_get() and acpi_pwm_get() for a detailed description.
Return
A pointer to the requested PWM device or an ERR_PTR()-encoded error code on failure.